Length and angle standards
Gauge Block Set M32, M47, M88, M112 and M122. Nominal lengths 1 ÷ 100 mm in steel, carbide or ceramic. Grades K, 0, 1 and 2 available in all sets. Steel gauges to all grades with DAkkS certificate. Carbide or ceramic gauges to all grades with UKAS certificate.
Length and angle standards
- • Standard: ISO 3650
- • Material hardness:
- Steel: highly alloyed, wear resistant
- Tungsten carbide: wear resistant and stable.
- Ceramic: stabilised zirconia, extremely resistant to wear and scratches
- • Coefficient of linear expansion
- Steel: (11,5 ± 1,0) x 10-6 K-1
- Tungsten carbide: (4,23 ± 0,1) x 10-6 K-1
- Ceramic: (9,7 ± 0,8) x 10-6 K-1
- • Certificates:
- Steel gauges to all grades with DAkkS certificate.
- Carbide or ceramic gauges to all grades with UKAS certificate.
- • Available on request :
- Tungsten carbide gauge block set
- Cermic gauge block set
- TESA maintenance kit
Gauge block set M32, metric
|
Part numbers |
Material |
Grade |
|
0651516027 |
Steel |
K |
|
0651515027 |
Steel |
0 |
|
0651511027 |
Steel |
1 |
|
0651512028 |
Steel |
2 |
Gauge block set M47, metric
|
Part numbers |
Material |
Grade |
|
0651516021 |
Steel |
K |
|
0651515021 |
Steel |
0 |
|
0651511021 |
Steel |
1 |
|
0651512021 |
Steel |
2 |
Gauge block set M88, metric
|
Part numbers |
Material |
Grade |
|
0651516014 |
Steel |
K |
|
0651515014 |
Steel |
0 |
|
0651511014 |
Steel |
1 |
|
0651512014 |
Steel |
2 |
Gauge block set M112, metric
|
Part numbers |
Material |
Grade |
|
0651516012 |
Steel |
K |
|
0651515012 |
Steel |
0 |
|
0651511012 |
Steel |
1 |
|
0651512012 |
Steel |
2 |
Gauge block set M122, metric
|
Part numbers |
Material |
Grade |
|
0651516011 |
Steel |
K |
|
0651515011 |
Steel |
0 |
|
0651511011 |
Steel |
1 |
|
0651512011 |
Steel |
2 |
Angle Gauges
- • For setting and calibration purposes.
- • Smallest step to 15’ (1/4°)
|
Part numbers |
Dimensions |
|
06769002 |
30°, 25°, 20°, 15°, 10°, 5°, 4°, 3°, 2°, 1°, 30',15' |
Accessories for gauge blocks
TESA Optical Flats
Used for examining flatness and adhesion of gauge blocks or any other test pieces having flat faces with same high grade of accuracy.
|
Part numbers |
Diameter, mm |
Width, mm |
Maximum permissible |
|
02530050 |
50 |
15 |
0,125 |
|
02530075 |
75 |
20 |
0,125 |
More information here
ARC Metrologia
Request Free Demo now!
Welcome in our centre for free one hour demonstration, do it now