Analogue lever-type dial test indicators

Analogue lever-type dial test indicators

These lever-type dial test indicators are especially intended for use on the shop floor or in the inspection room. Ideally suited for comparative measurements on a surface plate, for instance. Determine form, shape and position deviations as well as axial and runout errors.

Note on the use of TESATAST and P-LINE dial test indicators:
With parallel lying  insert to the workpiece surface, these idicators give true reading 1:1.
In other measuring position, the effective lever length changes so that the result needs to be corrected.

Тechnical data

  • • Bidirectional measuring with automatic reversal inside the movement.
  • • Continuous clockwise pointer rotation providing error-free reading.
  • • P-LINE models have secondary pointer with revolution counter
  • • Insensitive to magnetic fields.
  • • Jewelled movement with 7 rubies.
  • • Ball-bearing lever system. Measuring insert swivelling through to 240°.
  • • Very low measuring force.
  • • Exceptionally robust with full-metal construction.
  •  
  • • Standard: DIN 2270 / EN ISO 9493.
  • • Rotating dial.
  • • Movement with patented shock proof system.
  • • Lever system with friction drive to prevent overload.
  • • TESATAST is supplied in a plastic case together with:  
  •           1 Insert Ø2 mm;
  •           1 Wrench (No 01860307);
  •           1 Mounting rod Ø8 mm (No 01840105)
  •           1 Declaration of conformity
  • • P-LINE is supplied in a plastic case together with:  
  •           1 Insert Ø2 mm;
  •           1 Wrench;
  •           1 Mounting rod Ø8 mm, L=15mm (No 01840107)
  •           1 Mounting rod Ø4 mm, L=15mm (No 01840109)
  •           1  Measurement report
  •           1 User manual
  •           1 Declaration of conformity
TESATAST series, standard models

Dial face parallel to the axis of the measuring insert.
 
Part numbers Measuring range, mm Deviation span of
indication fe/ft/fges, µm		 Repeatability, μm Resolution, mm Hysteresis, μm Circular scale Measuring
force, N		 Insert
length, mm
01810005 0,8 10 / 5 / 13 3 0,01 3 0 ÷ 0,4 ÷ 0 0,15 12,53
01810006 0,8 10 / 5 / 13 3 0,01 3 0 ÷ 0,4 ÷ 0 0,15 12,53
01810007 0,5 10 / 5 / 13 3 0,01 3 0 ÷ 0,25 ÷ 0 0,06 36,53
01810008 0,5 10 / 5 / 13 3 0,01 3 0 ÷ 0,25 ÷ 0 0,06 36,53
01810009 0,2 2 / 2 / 3.5 1 0,002 1,5 0 ÷ 100 ÷ 0 0,15 12,53
01810010 0,2 2 / 2 / 3.5 1 0,002 1,5 0 ÷ 100 ÷ 0 0,15 12,53
S18001695 0,2 2 / 2 / 3.5   0,001 1,5 0 ÷ 100 ÷ 0   12,53
TESA P-LINE

Dial face parallel to the axis of the measuring insert.
 
Part number Measuring range,
mm		 Circular scale Repeatability,
μm		 Resolution,
mm		 Hysteresis,
μm		 Max permissible error
MPE total, µm		 Measuring
force,
N		 Insert
length,
mm
01810400 1.5 0 ÷ 25 ÷ 50 3 0.01 3 13 0.35 18
01810401 1.5 0 ÷ 25 ÷ 50 3 0.01 3 13 0.35 18
01810402 3 0 ÷ 50 ÷ 100 3 0.01 7 26 0.2 36
01810403 3 0 ÷ 50 ÷ 100 3 0.01 7 26 0.2 36
01810404 0.6 0 ÷ 5 ÷ 10 1.5 0.002 4.5 13 0.3 18
01810405 0.6 0 ÷ 5 ÷ 10 1.5 0.002 4.5 13 0.3 18
01810406 1.2 0 ÷ 10 ÷ 20 1.5 0.002 8 26 0.2 36
01810407 1.2 0 ÷ 10 ÷ 20 1.5 0.001 4.5 13 0.3 18
 



TESATAST series, perpendicular models

Measuring insert movement perpendicular to display.
 
Part numbers Measuring
range, mm		 Deviation span of
indication fe / ft / fges, µm		 Repeatability, μm Resolution, mm Hysteresis, μm Dial, mm Circular scale Measuring
force, N		 Insert
length, mm
01810204 0,8 10 / 5 / 13 3 0,01 3 28 0 ÷ 0,4 ÷ 0 0,15 12,53
01810205 0,5 10 / 5 / 13 3 0,01 3 28 0 ÷ 0,25 ÷ 0 0,06 36,53
01810304 0,2 2 / 2 / 3,5 1 0,002 1,5 38 0 ÷ 100 ÷ 0 0,15 12,53
TESA P-LINE series, perpendicular models

Measuring insert movement perpendicular to display.
 
Part number Measuring
range,
mm		 Circular scale Repeatability,
μm		 Resolution,
mm		 Hysteresis,
μm		 Dial, mm Max permissible error
MPE total, µm		 Measuring
forc,
N		 Insert
length,
mm
01810408 3 0 ÷ 50 ÷ 100 3 0.01 7 40 26 0.2 36
 

TESATAST series, lateral models

Measuring insert movement lateral and parallel to display.
 
Part numbers Measuring range, mm Deviation span of indication fe / ft / fges, µm Repeatability, μm Resolution, mm Hysteresis, μm Dial, mm Circular scale Measuring force, N Insert length, mm
01810011 0,8 10 / 5 / 13 3 0,01 3 28 0 ÷ 0,4 ÷ 0 0,15 12,53
01810012 2 27 / 12 / 31 4 0,02 4 38 0 ÷ 1,0 ÷ 0 0,06 36,53
01810013 0,2 2 / 2 / 3.5 1 0,002 1,5 28 0 ÷ 100 ÷ 0 0,15 12,53


TESA P-LINE series, lateral models


Measuring insert movement lateral and parallel to display.

Part number Measuring range,
mm		 Circular scale Repeatability,
μm		 Resolution,
mm		 Hysteresis,
μm		 Dial, mm Max permissible error
MPE total, µm		 Measuring
forc,
N		 Insert
length,
mm
01810409 3 0 ÷ 50 ÷ 100 3 0.01 7 40 26 0.2 36



SWISSTAST series, standard models

 

SWISSTAST standard model equipped with a ruby ball.
 

Part numbers Measuring range, mm Deviation span of indication
fe / ft / fges, µm		 Repeatability, μm Resolution, mm Hysteresis, μm Dial, mm Circular scale Measuring
force, N		 Insert
length, mm
01811000 0,8 10 / 5 / 13 3 0,01 3 28 0 ÷ 0,4 ÷ 0 0,15 12,53
01811001 0,2 2 / 2 / 3,5 1 0,002 1,5 38 0 ÷ 100 ÷ 0 0,15 12,53

*Same technical data as standard models, but equipped with a 2 mm dia. ruby ball tip No. 01860302.

Instrument Sets with Small Support
Part numbers Designation
01630003 Magnetic support + 2 x TESATAST & accessoires
01639055 Mini Set: Magnetic support + TESATAST 01810005

More information here
ARC Metrologia
Share

Request Free Demo now!

Welcome in our centre for free one hour demonstration, do it now